How to use cemented carbide saw blades:

　　 1. Please hang the carbide saw blade vertically on a dry shelf. Please avoid wet places. Avoid using corrosive solvents when cleaning. When the saw blade is not used for a long time, it should be cleaned.

　　 After sharpening and oiling for anti-rust treatment, put it in the original carton before placing it properly.

　　 2. The saw teeth of the carbide saw blade are super hard and sharp. It is forbidden to collide or fall on the ground. It must be handled with care.

　　3. When installing cemented carbide saw blades, first confirm the performance and purpose of the saw table, and check whether the alloy saw blades are cracked, distorted, uneven, or missing teeth before installing.

　　 4. After installing the carbide saw blade, you must confirm whether the center hole of the saw blade is firmly fixed on the saw table. The cutting direction indicated by the arrow of the carbide saw blade is aligned with the rotation direction of the saw table. It is strictly forbidden to install it in the opposite direction, the wrong direction will cause the gear to fall.

　　 5. After replacing the cemented carbide saw blade, it needs to be rotated for one minute before use to allow the saw table to enter the working state before cutting.

　　 6. When cutting the material, the aluminum alloy saw blade in normal operation must be gently cut into the material, and it is forbidden to press hard and push hard.

　　7. It is forbidden to reverse the carbide saw blade. Reversing will cause tooth loss and danger.

　　 8. If you hear abnormal sound during use, or see abnormal shaking or uneven cutting, please stop the operation immediately and find the cause of the abnormality. Replace the carbide saw blade. It is forbidden to suddenly stop the saw blade being cut

　　 Cut things in the middle. Stopping in the middle of the cutting object will cause the saw teeth to fall off and the saw blade to deform.

　　 9. After cutting, please wipe off the anti-rust oil in time to prevent the saw blade from rusting. When the saw teeth are not sharp, the saw teeth must be ground again, and the grinding must be specified by the manufacturer to increase the service life of the carbide saw blade. Which saw blade is good-Jiujiang Fuanchen Technology Co., Ltd. (0792-6950033) is mainly engaged in the production and sales of alloy saw blades, cemented carbide saw blades, aluminum alloy saw blades, and aluminum saw blades. The company has professional alloy saw blades. Technical personnel and alloy saw blade application experts ensure the rigor of product production, and have higher scientificity and applicability